HenryD Posted May 25, 2013 Report Share Posted May 25, 2013 What type of screwdriver do I need to take the panels covering the rotors off of my Leslie? At the moment I own 0 screwdrivers, so I can't check and guess like I normally would. Thanks for the help! Quote Link to comment Share on other sites More sharing options...
Chuck Nessa Posted May 25, 2013 Report Share Posted May 25, 2013 At first I thought this was a thread about an old girlfriend. What is the pattern on the screw heads? That will provide the answer. Quote Link to comment Share on other sites More sharing options...
JSngry Posted May 28, 2013 Report Share Posted May 28, 2013 Denton? Just for grins, print this out, take it to Elliot's Hardware http://www.elliottshardware.com/ go to the screw department, and see if there's any that they don't have. Yes, Elliot's has a screw department, and I'd be shocked if they don't have a screwdriver for any of them. Home Depot & Lowe's and all them are fine, but Elliot's is what makes them conveniences, not necessities. Quote Link to comment Share on other sites More sharing options...
Jim Alfredson Posted May 28, 2013 Report Share Posted May 28, 2013 A medium-size flathead is all you need. Quote Link to comment Share on other sites More sharing options...
HenryD Posted June 3, 2013 Author Report Share Posted June 3, 2013 Thanks, Jim. The flathead did the trick. Quote Link to comment Share on other sites More sharing options...
_forumlogo.png.a607ef20a6e0c299ab2aa6443aa1f32e.png)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.