Sign in to follow this  
Followers 0
swsailor

SK2 issues

2 posts in this topic

Have owned many Hammonds over many years.  Bought an SK2 because it is light for an old guy to gig with.  Seems to be a lemon.  

1, Error message "panel disconnect" comes up - all controls are dead but the organ plays per the sound in use.  Originally a reboot would sometimes fix it but eventually nothing would make it operational again; Replaced main board - happened again today,  

2, At boot up, many times the factory presets will load and not the custom ones I have created - if I tap a preset button it loads the custom ones,  Problem is that all the other custom settings like foot switch control have gone back to factory default also!  grrrrrrrrrrrr

3, Also - if you choose manual mode there is no sound until you move the drawbars for upper, lower and pedals...

Anyone have suggestions?

Share this post


Link to post
Share on other sites

there are only two major components: the Main board and the various interface board(s)....and you've replaced one of them.  Having said that, connector issues should always be the first suspect, going by the KISS theory,  I hope this helps.  I assume you've spoken w/ Ray - best to you

 

there are only two major components: the Main board and the various interface board(s)....and you've replaced one of them.  Having said that, connector issues should always be the first suspect, going by the KISS theory,  I hope this helps.  I assume you've spoken w/ Ray - best to you

 

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.